Earth Tags

Download Data Sheet

CMP slip-on Earth Tags, installed between the Cable Gland and equipment, provide an earth bond connection as specified in BS6121:Part 5:1993 and comply with category B rating specified in IEC 62444.

Download Here

CMP slip-on Earth Tags, installed between the Cable Gland and equipment, provide an earth bond connection as specified in BS6121:Part 5:1993 and comply with category B rating specified in IEC 62444. CMP Earth Tags have been independently short circuit tested to verify their suitability under specified service conditions.

 

Available materials:

  • Brass
  • Nickel Plated Brass
  • Aluminium (upon request)
  • Stainless Steel (upon request)
Brass Nickel Plated Brass Thread Diameter Minimum Thickness Nominal Diameter (mm) Hole Size Nominal Length (mm) Nominal Centres (mm)
Batt Part No. CMP Reference Batt Part No. CMP Reference "A" (mm) "C" "D" "E" "F"
88400 16ET - 16ET5 M16 1.3 25.4 M6 50.4 30.2
88401 20ET 84195 20ET5 M20 1.3 27.1 M6 52.3 33.1
88402 25ET 84199 25ET5 M25 1.5 35.1 M6 59.2 35.6
88403 32ET 84224 32ET5 M32 1.5 45.2 M12 77.0 43.1
88404 40ET 84225 40ET5 M40 1.5 53.7 M13 88.7 45.4
88405 50ET 84226 50ET5 M50 1.5 65.2 M13 111.2 58.1
88406 63ET - 63ET5 M63 1.5 82.6 M13 128.7 66.8
88407 75ET - 75ET5 M75 1.5 95.4 M13 141.5 73.0
- 90ET - 90ET M90 2.0 114.2 M13 161.0 85.0

Batt Part No. Size Material CMP Reference
88400 M16 Brass 16ET
88401 M20 Brass 20ET
88402 M25 Brass 25ET
88403 M32 Brass 32ET
88404 M40 Brass 40ET
88405 M50 Brass 50ET
88406 M63 Brass 63ET
88407 M75 Brass 75ET
84195 M20 Nickel Plated Brass 20ET5
84199 M25 Nickel Plated Brass 25ET5
84224 M32 Nickel Plated Brass 32ET5
84225 M40 Nickel Plated Brass 40ET5
84226 M50 Nickel Plated Brass 50ET5

The information in this datasheet is for guidance only and subject to change without liability. Images provided are representations; actual cable dimensions may vary due to manufacturing tolerances.

Choose your accessories